Dayliff pH Plus – 5 kg

Product: pH Plus (alkalinity increaser for water treatment)
Pack Size: 5 kg
Form: Granular / powdered chemical

🧪 Purpose & Use

Dayliff pH Plus is designed to increase the pH level of water, typically in:

• Swimming pools

• Borehole and municipal water systems

• Industrial water treatment

• Aquaculture and irrigation systems

It is used when water is too acidic (low pH) and needs adjustment to a target range.

⚗️ Chemical Characteristics

• Main Active Ingredient: Sodium carbonate (soda ash) or equivalent alkalinity-raising compound

• Appearance: White crystalline powder

• Solubility: Readily soluble in water

• Bulk Weight: Approx. 5 kg net

🔍 Typical Application

• Raise pH: Helps increase water pH toward neutral/alkaline range

• pH Target: Adjust to recommended levels for swimming pools and general water use (typically around pH 7.2–7.8 for pools; varies by application)

• Dosage: Depends on current pH and water volume — typically small amounts added incrementally with mixing and retesting

⚖️ Handling & Storage

• Wear PPE: Gloves, eye protection, dust mask

• Avoid inhaling dust when handling the powder

• Keep dry: Store in a cool, dry place with container sealed

• Avoid contamination: Keep away from acids and incompatible chemicals

⚠️ Health & Safety

• Irritant: Can cause irritation to eyes and skin

• Do not ingest

• In case of contact with skin or eyes, rinse thoroughly with water

• In case of ingestion or serious exposure, seek medical attention

🛠 Pro Tip

When adjusting large volumes of water:

1. Test initial pH.

2. Add pH Plus in small increments (based on water volume).

3. Allow time for mixing and retest.

4. Adjust again if needed.

This prevents over-correction of pH.